DreamCode
Floors, stairs & roofs
Multi-storey houses, staircases and roof shapes.
Adding a storey#
Write floor 2, then the rooms of that storey. Put the first one over a ground-floor room and place the rest next to it as usual.
house.dream
floor 1room Living 7x5door southstairs eastfloor 2room Landing 7x5 over Livingroom Bedroom 4x5 right of Landing
| Measure | Value |
|---|---|
| Storey height | wall height + 0.15 m slab (2.85 m with the default 2.7 m walls) |
| Upper floor | The slab over the storey below — an upper room that overhangs nothing gets its own floor |
| Roof | Only the top storey gets the roof shape; lower storeys get flat slabs |
Tip
Keep upper rooms over ground-floor rooms. An overhanging room builds, but it has nothing holding it up.Stairs#
Add stairs to one room on every storey except the top. It builds a straight concrete staircase with railings on both sides, cuts a stairwell in the slab above and splits that room’s ceiling around it.
| Direction | stairs east|west|north|south — the direction you climb. Default: east in a wide room, north in a deep one. |
| Placement | Against the north wall when climbing east/west; against the west wall when climbing north/south. |
| Size | 1 m wide; risers 0.19 m, treads 0.25 m — 15 steps and about 3.75 m of run for a 2.85 m storey. |
| Room needed | About 4.1 m in the climbing direction and 1.3 m across it. |
| Limit | One staircase per storey. |
Make the room on top of the stairs a hall or landing — that’s where the stairs arrive.
Roof shapes#
| Statement | Result |
|---|---|
roof flat | Flat slab with a small overhang (default). |
roof gable | Two slopes meeting at a ridge. |
roof pyramid | Four slopes meeting at a point. |
roof asbestos | Corrugated sheet roof. |